Suzuki Jimny LED light bar brackets 42” off road 4x4 with bush cable mounts bushcable
- Fits all Jimny's 1998 - 2018 hardtop versions
- Laser cut from 304 grade stainless steel for longevity
- No drilling of the bodywork (although for a light bar power is needed – this can be up the side of the snorkel, up the inside of the a pillar and out the Ariel bracket or under the roof rail foot)
- See my other items for a dash switch to fit into the existing dash holes.
- Rubber feet are no longer supplied with kit (i do not warrant light bars, just that they work initially as some are loosing odd LED's after 6 months or so)
Product tabs
£0.00
£0.01
Earn 0Reward points
Related products
SUZUKI JIMNY TO SJ HEAVY DUTY TRANSFER BOX MOUNTS HD SJ410 413
- To fit SJ410 / 413 transfer boxes into a Jimny!
- Made from 8mm stainless steel
- Direct Replacement
- Come with zinc coated fixings
£78.00
View details
£84.00
Suzuki Jimny LED HALO Fog Lights
- Fits all Jimny's 1998 - 2007 newer style bumper
- H11 plug for the fog light, outer rings are to wire up and no connector is fitted to these.
£84.00
View details
£42.00
Suzuki Jimny LED light bar brackets 42” LIGHTBAR ALSO FIT REAR
Fits all Jimny's 1998 - 2018 hardtop versionsLaser cut from 304 grade stainless steel for longevity No drilling of the bodywork (although for a light ...
view details
£42.00
View details
£9.60
Suzuki Jimny Heater Control Controls LED bulb
Fits all Jimny's 1998 - 2018Single LED heater control back light - WhiteRequires the plastic bulb holder shortening by around 2-3mm to enable a snug f...
view details
£9.60
View details
£25.50
JIMNY GEARLEVER EXTENSION - 3" FOR BODYLIFTED JIMNYS GEAR STICK RAISER RAISING
- MACHINED BILLET ALLY GEARLEVER EXTENSION SIMPLY UNSCREW YOUR SHIFTER KNOB, REPLACE WITH THE THREADED 3" EXTENSION, REFIT ORIGIONAL GEAR KNOB
£25.50
View details
£36.00
Suzuki Jimny 98-18 Boot Floor Jack Wheel Well Weld in Floor Cover Ideal For Fitting Rear Winch & Covering The Floor Over
- Fits all Jimny's 1998 - 2018
- Laser cut mild steel jack well cover, to flat floor the boot to allow a winch to be fitted to the underside
£36.00
View details
£52.80
SUZUKI JIMNY 98-18 UNIVERSAL ROOF RACK MOUNTING FEET BRACKETS
Fits all Jimny's 1998 - 2018 hardtop versions (Brackets only no rack)Laser cut and folded from 304 stainless steel for longevitySimply fit these brack...
view details
£52.80
View details
JIMNY DOG CAGE DIVIDER PANEL PICKUP VAN CONVERSION PARTS BULK HEAD BULKHEAD - FOLD DOWN HATCH
£180.00
£180.00
JIMNY DOG CAGE DIVIDER PANEL PICKUP VAN CONVERSION PARTS BULK HEAD BULKHEAD - FOLD DOWN HATCH
DIVIDER FOR USING THE REAR AS A VAN OR WITH DOGS ETC. SIMPLY BOLTS IN TO THE REAR GRAB HANDLE EXISTING MOUNTS, AND ALSO THE REAR SEAT FRONT SECURING B...
view details
£180.00
View details
£216.00
Suzuki Jimny 98 - 18 M13A & G13BB Engines Exhaust Bypass Delete Pipe Back Box Muffler Backbox STAINLESS STEEL
Fits all Jimnys 98-18 with the M13 Engine - there are 2 different types of exhaust back boxes ensure you buy the correct oneSTAINLESS steel direct rep...
view details
£216.00
View details
£23.70
SUZUKI JIMNY 98-18 BOOT BACK DOOR STORAGE NETS COMPARTMENTS NET COPARTMENT MOLLE
Fits all Jimny's 1998 - 2018 hardtop versions (although at some time the rear door trim changed, so you need to make sure you have 700mm width of fla...
view details
£23.70
View details
£38.40
SUZUKI JIMNY 98-18 HEADLIGHT MASKS COVERS 'BAD BOY BONNET STYLE' ANGRY EYES
- Give your jimny an eye mask makeover! (Pair of)
- Either love them or hate them, made from durable ABS.
- Easy to fit with pre applied double sided tape.
£38.40
View details
£0.00
JIMNY REAR DIFF DIFFERENTIAL REBUILD BEARINGS 98-18
- REAR DIFF BEARINGS, SEE DROP DOWN BOX FOR INDIVIDUAL PARTS OR A FULL REBUILD KIT
All the above fit all Jimnys, SJ (not 410) & Samurai
£0.00
View details
£32.40
JIMNY FUEL TANK CONNECTORS CONNECTIONS CONNECTION FITTING PLUG PUSH FIT 98-18
- PAIR OF JIMNY FUEL TANK CONNECTORS
£32.40
View details
£24.00
JIMNY LOCKING HUB REPLACEMENT GASKET GASKETS FOR STANDARD VAC VACUUM HUBS OR AFTERMARKET MANUAL LOCKING
- A PAIR OF GASKETS FOR THE STANDARD OR AFTERMARKET LOCKING HUBS
- 1 FOR EACH END OF THE AXLE
£24.00
View details
£42.00
JIMNY 98 ON GEN 3 & 4 REAR PANHARD ROD RELOCATION RAISER BRACKET 30 40 50MM LIFT KITS 2"
- TO RETURN THE REAR PANHARD ROD TO THE STANDARD POSITION AFTER FITTING A LIFT KIT OF 30/40/50mm
- SUPPLIED WITH FITTING KIT AND POWDERCOATED BLACK
£42.00
View details
£52.80
JIMNY 2ND BATTERY TRAY MOUNTING BRACKET WITH ABS
STAINLESS STEEL BATTERY MOUNT FOR RUNNING A 2ND BATTERY FOR WINCHES ETCYOU WILL ALSO NEED A BATTERY RATCHET STRAP FOR VEHICLES WITH ABS, SEE MY OTHER ...
view details
£52.80
View details
£127.20
Suzuki Jimny 98-18 Bolt in Hidden Winch Tray
Fits all Jimny's 1998 - 2018 CNC Laser cut and folded from 5/6mm mild steel, with the chassis boxing off plate as pictured.Fits around 10 different bo...
view details
£127.20
View details
£57.60
SUZUKI JIMNY 98-18 HEADLIGHT SURROUND GUARD
Fits all Jimny's 1998 - 2018Mild steel powder coated black. Really enhance the look of the front of the jimny whilst offering some protection to the h...
view details
£57.60
View details
£162.00
POWERspec Suzuki Jimny 1.3L 16v (98’-18) Clutch Kit
POWERspec Suzuki Jimny 1.3L 16v (98’-18) Clutch KitPerfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading1x LOF HD Drive plate, fitted with...
view details
£162.00
View details
£15.00
SUZUKI JIMNY MANUAL LOCKING HUB SPACERS
SPACERS THAT ARE REQUIRED FOR FITTING C-90 VITARA, ESCUDEO 89-01, SJ410 & 413 HUBS TO THE JIMNYSPAIR OF 5MM ALUMINIUM 5 X 60 PCD (STANDARD FOR JIM...
view details
£15.00
View details